Hamurana Guitars NZ

 It’s always interesting to see where my pickups end up, in this case Hamurana Guitars NZ.

Hamurana Guitars

They make World class guitars combining looks, playability and tone. I’ve played a few – they are outstanding.

Hamurana have used my pickups in a few builds and it’s always great to see what he comes up with. This time he’s used a pair of my my Black Sand humbucker size P90’s.

You can get in touch with Hamurana Guitars and order your dream guitar here:

https://www.hamuranaguitarworks.co.nz/

Here’s more info on the Black Sand pickups:

The humbucker sized P90 is a great pickup – it sits tonally between a humbucker and and a strat type pickup. If your neck humbucker is a bit thick and woolly sounding for you, you want more clarity, or just want a different tone, then this one may be the answer. The physical size of this pickup is identical to that of a “normal” humbucker so it will pop straight in.

P90’s are different to other single coil pickups. They have a wide, flat coil similar to that of a Jazzmaster but the magnetic field is a very different shape. Fender single coil pickups have the coil wound around the magnet giving a focused, precise percussive sound. A P90 has 2 bar magnets underneath the coil; this broadens the magnetic window allowing the pickup to listen to a bit more string and thickens the sound. I chose Alnico V bar magnets for this model to help give some grit and power characteristic of a P90.

Of course, too much power and the pickup would sound too thick and bass heavy which is not its purpose. Too little power and it just won’t snarl.

Humbucker sized P90s are such a useful pickup. They sit tonally between a single coil and a humbucker (roughly speaking). and their physical size means they pop straight into any humbucker equipped guitar.

The development of my “Black Sand” pickup was a bit backwards. Usually I make a bridge pickup first and work from there but with this one the neck pickup came first. I had a customer ask for a neck pickup for an es335 to sound clearer than his existing Gibson humbucker. I sold a few neck pickups before thinking it would be a good idea to have a set. So I started work on the bridge pickup.

I wanted this bridge pickup to have clarity in the lower mids to stand out from humbuckers while having enough power to grit up nicely. I wanted it to be clean when tickled and to growl at you when you dig in. P90’s are all about dynamics. It had to match the existing neck pickup or work well as a stand alone in a HSS situation.

Of all the pickups in my range this one came together the quickest. There were only 4 or 5 prototypes and I was happy. Experience and intuition combined with a notebook where I’ve written down details of every experimental pickup I’ve made since 1995.

There were a load of prototypes in and out of a Les Paul, Tele Delux and PRS, through different amps and in the hands of different players. I never trust just my own ears with my pickups. I like to get opinions and suggestions from a few players before making any final decisions. I listen to what players say and I adjust prototypes accordingly, but at the end of the day the final decision is mine. I’m always aware of the phrase “a camel is a horse designed by committee”.

It took a while to get this one right. A pickup would sound great at workshop volume, them I’d play it in a band situation and it would be too boomy, too much like a humbucker. So I’d have a think and make another. In the end persistence paid off.

The pickups I finally settled on went into my Les Paul and off to a gig for the ultimate test, and that’s where they’re staying.

The neck “Black Sand” is a great match for either my “Integrity” or “Cloud Nine” bridge humbuckers or as a set with its equivalent “Black Sand” bridge humbucker sized P90.

I agonised over what to call this pickup set. I wanted a name that would reflect the apparent contradiction in P90’s. From the perspective of a humbucker player they are clear and chiming. From the viewpoint of a single coil player they are powerful and gritty. They’re one thing while looking like another. I wanted a oxymoron to reflect this contradiction, one that might include the unique magnetic structure that gives the P90 its character. So I went for a run along Muriwai beach to think. And there it was staring me in the face (literally). Muriwai has black volcanic sand due to its iron content and it’s magnetic. So I’ve called this set “Black Sand”.

I’m very happy with this pickup – hopefully you will be too.

Mr Glyns Pickups

“TheTron” - by Mr Glyn's Pickups

 TheTron pickup set is based around the legendary Gretsch pickups Of the 50’s and 60’s. To say TheTron has character is an understatement. TheTron is full and rounded with a well balanced mid range but with that distinctive ‘Clank’ that separates it from other pickups. The neck pickup is clear and fat and the bridge stands out from the mix without ever sounding harsh.

Over the years I’ve repaired a fair few old Gretsch pickups and noticed the best sounding ones are at the upper range for ohms. I’ve taken that design and tweaked it until I got the fullness I was looking for but without loosing clarity or clank.

Most of my pickups are made in collaboration with a professional player, but not TheTron. I started playing guitar at the age of 16 when I first heard Malcolm Young – a Filtertron through an almost clean valve amp. I didn’t feel I needed another set of ears for this one, I knew exactly what I wanted.

I needed this pickup set to be crystal clear with a clean amplifier but to come into its own when pushing an amp to clip. The neck pickup needed to be clear, full and chiming in both a big archtop and in the neck position of a Telecaster. The bridge pickup needed to have no shortage of character, a clean almost jangly tone when played gently but with enough go in it to push the front end of a valve amp to clip when you dig in.

TheTron is the perfect pickup as a Gretsch upgrade, for the modern player wanting something other than Gibson style humbuckers, rockabilly players after that traditional tone, jazz players or, like me, Malcolm Young fans. There’s so much you can to with The Tron.

For the modern player with one foot in the past.

 

And as for the name “TheTron”? – I think you have to be a Kiwi…

 

 https://mrglynspickups.com/2021/09/22/thetron/

 https://mrglynspickups.com/

 

"Cloud Nine" humbucker demo

Thanks to Jonathan Ho for his "Cloud Nine" humbucker demo. Here's his channel - well worth a look: https://www.youtube.com/user/GATvsGAT... https://mrglynspickups.com/ “Cloud Nine”-hot humbucker The “Cloud Nine”-hot humbucker is a versatile ROCK pickup with plenty of mids, plenty of power but with enough clarity to help you stand out in the mix. A great pickup set for the Blues/Rock player but also well suited to heavier sounds , think Randy Rhodes or EVH. It with push the front end of an amp but will also clean up especially with a treble bleed. Here’s the Cloud Nine story: I am at heart a man of ROCK. Since the advent of the DiMarzio Super Distortion players have been able to get some power out of their pickups, enough to really push an amp. The neck pickup needed to be clear and present but with enough power for some of those sweet lead lines. I wanted the bridge pickup to have power to scream with the best of them while retaining enough clarity to have definition. When I play a 7th chord I want to hear it as a 7th and not sound mushy like a John Deere tractor at full throttle. It’s a real danger with hot pickups that they lose character and tone. I needed a crunchy rhythm with strong mids and an over the top lead sound. I want to get squawking pinched harmonics whenever I please. Not only that but I need it it to clean up nicely and react well to a treble bleed circuit. A humbucker for every situation, for players not afraid of a bit of gain. Not much to ask, eh! I got through a lot of wire and magnets experimenting over the years to get this set right. I suppose I worked on it for about 5 years, different magnets, winds, wire thickness, insulation, winds per layer – there are a lot of factors. Whenever I felt I was close I used them at a gig to hear how they sat in the band. Pickups can sound quite different next to a drummer or in a mix. I tweaked and adjusted…Eventually I was happy with the design and I was lucky enough to have legendary Kiwi band ‘Head Like A Hole’ help out with road testing. I knew if they came back from tour happy then I was on to a winner. They did. When you get it right it feels so good, a sensitive pickup rich in harmonics is so much fun so I called it the “Cloud Nine” which how I felt at the end of it all. This is the pickup set I gig with myself in my covers band now. I have them in an Epiphone Sheraton with treble bleeds on the volume pots. With this set up it works for everything from The Smiths to Metallica and all points in between. I don’t feel the need to swap guitar – these pickups work for everything.

“Tui” hot Strat pickups getting a workout

 

Thanks to https://www.thejamunit.com/ for showing us what the “Tui” hot Strat pickups can do.

“Tui” hot Strat pickups

I’ve wound a lot of Strat pickups since I started in 1995. I started off re-winding cheap pickups and then moved on to repairing old dead Fender pickups. Every experiment was written down in a notebook with tone comments. Back when I started there wasn’t much information available so there was a lot of reverse engineering and a lot of trying things out. That learning time was invaluable to developing instinct for how to change the sound of a pickup. I’ve still got the note book and I’m still adding to it.

In, I think, 2014 a customer of mine approached me wanting a set of Strat pickups. He’s a great blues player and had recently moved from using a Les Paul to a Strat. He described the sound he was after and it seemed to me it was the same as I’d been after myself so I put some time in to designing a pickup set for him.

The “Tui”- hot Strat pickups needed to be most definitely a Strat sound – I hear plenty of Strat replacement pickups that are fine but just not Strat-ish. Secondly I wanted a bit more power, just a bit, enough to make a good old valve amp clip a bit easier than a “vintage” pickup would. And there needed to be dynamics – tickle it and it’s clean, dig in and it grits up. As I was making the original version of this set for a player used to humbuckers I wanted to reduce the ”ping” of the attack. I’ve added steel base plated as standard to this set. This changes the shape of the magnetic field, broadening the harmonic window. They add a wee bit of power, a wee bit of bass and reduce that pesky ping.

The neck pickup needed to have “that” Strat sound with fullness and clarity. It’s the ‘go to’ sound for most Strat players. The middle pickup needed to have some ‘quack’ to it with its own distinctive personality. The bridge pickup shouldn’t be too thin, it needs to have plenty of highs but not too much of that ‘ping’ or it’s almost useless. Then there are the other sounds – positions 2 and 4, mistakenly referred to as ‘out of phase’. They are really just 2 pickups in parallel. It’s hard to predict what those sounds will be, there was a lot of experimenting.

So I consulted my old note book and wound a lot of pickups and fitted them in a few test Strats. I’ve been lucky enough to have some great players as repair customers and so I was able to get quite a few opinions.

Eventually I was happy and I fitted a set for my ex Les Paul customer and he loved them straight away. A few months later he contacted me to say he was still loving them. I love it when players do that.

I’ve fitted resulting sets into a lot of instruments and it turns out that not only blues players like them, they seem to work for everyone. I shouldn’t be surprised, the Stratocaster is such a versatile guitar, of course they do.

https://mrglynspickups.com/

“Silver Lady” Telecaster Pickups

I make two flavors of Telecaster Pickups. Here’s the low powered “Silver Lady in the hands of Jason Herbert.

To hear the “Cruel Mistress” Tele set and lots more demos go to my YouTube channel.

Telecasters are brutally honest guitars. There’s no hiding behind fat mushy tones – if you can do it on a Tele then you really can do it.

I wanted to make a Telecaster Pickups set that would reflect the clear honest tone of an old Tele. It’s a delicate balance to get enough treble and for the top end to have sufficient warmth to be usable, but with no hint of woof or boom in the bottom. The bottom needs to be full and clear with no hint of muddiness. The bridge needs a twang but it has to be a warm twang without being over harsh. I’ve used Alnico III magnets with a vintage style wind on both these pickups

Through my repair work I’ve re-wound a lot of old Tele pickups. This is invaluable experience for designing my own version. I enlisted the help of a couple of experienced Telecaster players as test pilots. I really needed plenty of opinions and testing through a variety of amplifiers to get this one right.

I’m really happy with the warm classic tone of this set, clear and chiming with just the right twang. So I have given them a classic name – “Silver Lady”.

https://mrglynspickups.com/2020/03/29/silver-lady-vintage-telecaster/

CRUEL MISTRESS

There is nothing like the high end snarl of a good Tele bridge pickup. However, Tele Pickups are complicated. It’s a sound that needs to be just right – too much treble and it can sound grating and obnoxious, too little and it just isn’t a Tele. The treble needs warmth while still cutting through a mix like a zombie banjo.

With the “Cruel Mistress” -hot Tele wanted to make a pickup with a bit more power to drive an amp harder while keeping the Tele character. My biggest concern was not losing what a Tele is all about. In my repair work I come across quite a few replacement Tele pickups that just don’t sound like Teles. Bridge pickups need grit and the neck a chimey clarity and together they should be full and open and matched well enough to create almost a reverb sound with the switch in the middle position.

The “Cruel Mistress” -hot Tele uses AlnicoV magnets to help with the attack and AWG43 wire to help with the snarl.

The neck pickup on a Tele needs to be smooth and warm and have a great balance with the bridge pickup so that the middle position rings with an almost reverb-like tone. The difficulty with Telecaster neck pickups is there just isn’t much space under that cover. As a result it can be a hard pickup to get right and there were a lot of experiments and disappointments on the way. Eventually I came on a design that has enough bottom end to sound full but not so much to sound boomy. And the final pickup was a great match to the bridge.

I had help from the ears of a couple of my regular customers who were generous enough to let me load their guitars with prototypes. The whole process takes time and only after many road tests and versions did I fix on a design. As a result, each of my designs have been developed over many years of subtle changes and road tests. Having help like this means my pickups are trialed through many different amps and playing styles. The neck/bridge balance as well as dynamics/compression need to be tested in as many situations as possible to find a pickup that will work for most players.

So if you need some grit and aggression from your Tele this is the set for you.

 

 

 https://mrglynspickups.com/2020/03/29/cruel-mistress-hot-tele-pickups/

https://mrglynspickups.com/

7 String Humbucker - “Attitude” by MrGlyn’s Pickups

 Thinking of a 7 String Humbucker for modern metal/fusion? 

MrGlyn’s “Attitude” humbucker (6 or 7 string) was developed in collaboration with Graham Young in the UK. He’s a pretty demanding player with an amazing ear for detail. 

For the full story of how we did it and for more demos go to my blog:

https://mrglynspickups.com/2021/05/17/7-string-humbucker/

https://www.facebook.com/grahammarkyoung/videos/10159284278801800/?t=0

 

 

Attitude humbucker - Mr Glyn's Pickups

 

For a while I’ve been working on extending my range of humbucking pickups for rock players. The Cloud Nine will do just about anything but I wanted to offer a more specific pickup for modern rock/metal.

I decided to start with a 7 string which is a slightly unorthodox way of going about it but I was concerned with getting the bottom end right. If there was any sogginess in the bottom end a 7 string would show it up more than a 6 string.

7 string pickups are not like others. The low bass string reacts so differently, there’s a lot of string deflection and low harmonics. My mission was to tame this bass and keep it tight but not to sacrifice the sound quality of the treble strings. The treble still needed to be sweet and singing. The mids needed to be balanced and noticeable. I didn’t want this pickup scooped; the mids had to stand out from the mix when needed to.

So in October 2019 I got back in touch with my old mate Graham Young in Yorkshire. He’s an amazing player and really knows his gear.

Back in 1998 I wound a 6 string humbucker for Graham. In those days I had a guitar shop and repair business in Leeds in the North of England and he wanted a bridge pickup to suit his style for a parts caster.

Years passed and he became a 7 string player, so when I decided to develop a 7 string pickup Graham was the person I asked to be test pilot. We’d very loosely kept in touch over the years and it turned out he was still using the 6 string pickup I’d made for him back in the 90’s.

We had a chat via messenger and it turned out he’d tried a lot of pickups but none quite did it for him. So I listened to his thoughts, came up with a design and went away and made a prototype.

The first one wasn’t quite right, so he sent it back and I changed a few things and returned it. I don’t know how many adjustments I made but that pickup accumulated quite a few air miles between NZ and the UK over the next few months.

Every time we got closer, every adjustment less than the one before. When you get that close you know you’ve got a good pickup. I was at the point when I felt we really had something great but I just needed that confirmation.

Then Covid 19 happened, the mail got too unreliable to send stuff overseas with any confidence of it arriving and the process was put on hold.

At the end of June 2020 I got a call from Gabe Dovaston in Papamoa. He’d done some demos for me with some of my other pickups and was asking if I did a 7 string, just in case, for an Ibanez of his. Well, this seemed like a chance to test my new pickup on fresh ears. I made a copy of the last one I’d sent Graham, the one I was happy with, and got it off in the post. I sat back and waited. It only took a few days and I got a very happy call, he loved it and he’d already made a demo that he’d put on YouTube.

Great news, but what was I going to call it? The pickup was already on YouTube, it wasn’t on my website yet and it didn’t even have a name!

I got on Facebook and asked people to come up with a name; there were so many excellent suggestions but nothing quite did it. In the end this pickup that had taken so much work to develop, traveled so far and refused to go away I called the “Attitude”.

The Attitude is available in 6 and 7 string, for neck and bridge positions.

https://mrglynspickups.com/

Mr Glyn's Pickups 'Bellbird' demo

 

If you don't know Andy Marra from Christchurch and his beautiful guitar playing here's your chance:

 

 

 

https://mrglynspickups.com/2020/03/29/bellbird-vintage-strat-set/

The Stratocaster has been around since 1954 and the legend continues. Reading the internet (!?) tells me there have been good and bad years or decades, guitars to avoid and ones worth hundreds of thousands of dollars. I’ve been repairing guitars since 1995 so I’ve played a lot of old Strats and analysed a lot of old pickups. Vintage pickups aren’t all great but the good ones are fantastic.

I’ve based my Vintage Strat set on the best of the old pickups I’ve had the pleasure of playing through . So I use AWG42 heavy formvar insulated wire – there’s something about the thickness of that insulation that just works with an old Strat pickup.

I’ve aimed for that old quacking chime that makes Strats wonderfully percussive but with a singing quality that’s so musical. Warm and clear with beautiful almost reverb-like clean tones – that’s what I want out of an old Strat. The neck needs to be fat, round and clear, the middle pickup needs to quack and the bridge a cut through twang without thinness. The all important ‘in between’ sounds in positions 2 and 4 must be balanced and characterful. Nothing says Strat more than these sounds.

The Bellbird set has been designed mainly for clean tones but they’re certainly not afraid to perform with a bit of gain. As part of a HSS set they’re great with one of my ‘Integrity’ humbuckers in the bridge position.

MrGlyn’s Pickups “Integrity” humbucker demo

A big thanks to Nik Dobbin for this MrGlyn’s Pickups “Integrity” humbucker demo

https://mrglynspickups.com/2020/03/29/blue-sky-vintage-humbucker/

Every pickup manufacturer makes a “Vintage” humbucker based on the Gibson PAF, of course they do – old Gibsons sound so good.

So how come they all sound so different? Well, the simple answer is that PAF’s were all different. I’ve been a full time luthier since 1995, whenever I come across an old humbucker I test the ohms and the gause and have a good listen. They’re all different. My conclusion is that pickup manufacturers have taken the PAF they like and based their own version on that. Old PAF’s vary so much so modern ones do as well.

I like my own version to be clear sounding, have obvious string separation and definition and to keep clarity no matter how much gain. The mids must be strong and woody, this is not a “scooped” pickup. The clean sound needs to be chimey and clear with no mush; through a valve amp I want clarity. When I tickle it I want clean and vocal sounding when it clips. The bridge pickup needs to be well behaved with high gain and clear with enough cut through so the drummer knows you’re there. The neck smooth, clear and articulate. Warm but with none of the boom you get with a more powerful pickup.

I don’t want much do I.

My “Vintage” Humbucker has an Alnico II magnet and I’ve used plain enamel insulated magnet wire with asymmetric coils to open up the mids. The very first pickup I ever made back in 1995 was a PAF style and I’ve been tweaking the recipe ever since. Like all my pickups I’ve used a number of test pilot players in its development as well as gigging it myself. It wasn’t until around 2015 that I settled on this particular design. I did a gig with a set in a PRS SE series only last weekend – sounded great to me.

The full and honest sound of this pickup along with it’s timeless tone inspired the name “Integrity”.

https://mrglynspickups.com/

Pickup Height Adjustment

 Pickup Height Adjustment is crucial to your tone. I find that the better the quality of the pickup the more difference the height makes to the tone.

There is, of course, no correct distance from the string so the measurements I’ll give you are a guide and a great place to start. I recommend you set your MrGlyn’s Pickups to these heights when you installed them but feel free to tweak them to your own taste after.

The principal is, the closer to the strings the pickups are the louder and more dynamic the sound, further away is more compressed and quieter. 

But there’s another factor. Pickups work by magnetism, if a pickup is too close to the string the magnet will attract the string and cause a strange wobbly sound called a wolf tone. This is much more pronounced with single coil pickups and on the bass strings on the higher frets. These ‘wolf tones’ are sometimes called ‘Stratitis’.

The pickup height is measured from the top of the pickup pole (or cover) to the underside of the string when fretting the highest fret.

www.mrglynspickups.com

Here are my recommend heights:

https://mrglyn.blogspot.com/2016/10/treble-bleed-capacitors.html

How Pickups Work

Hofner Pickup re-wind

I had a visit from Paul Crowther the other day (always a pleasure to see him). He's rather a legend for amongst other things his 'Hotcake' overdrive pedals and the 'Prunes and Custard' (my favorite for theremin).

http://en.wikipedia.org/wiki/Emlyn_Crowther

 He wanted to know if my coil winding machine was up and running -  he had an interesting pickup for me to wind.

 Its an old Hofner pickup which I guess is from the 50's. The guitar has 3 of them and this one has a break in the windings so needs to be re-wound.
This would normally be a straight forward job except for the design of this pickup.

 This is the inside of it. The windings (around the outside) are not wrapped around a bobbin. They are just sitting in the pickup and have been wrapped in tape to protect them. In the middle you can see the magnets sitting in a hard putty. There are incidentally only 5 magnets.
 So the problem Paul left me with was how to wrap about 5000 turns of extremely thin wire into a coil and therefore make a pickup.
 After a long brainstorming session with Sheena we came up with a plan.

 We figured that the wire had to be wound around a bobbin and then somehow the bobbin removed.

 So I made this bobbin. The sides are plastic from a Strat pickguard (white) and the centre has been carved from candle wax.

The bobbin bolts together and is attached to another plastic plate which in turn fits to the winding machine.
 The idea is to wind the pickup on this and then warm the completed coil up and melt the wax. The wax should seep into the coil thus potting it as well. Then the sides can be unbolted and voila a copy of the original coil.

 Winding the coil wasn't any different from any other pickup - so now for the tricky bit.

 I warm the coil ever so gently with a heat gun. I put my free hand next to the work to judge the temperature - if it gets too hot the plastic will melt and I'll be starting again.

 When I see some wax oozing out I ever so gently remove the top plate.

 With the wax exposed I can apply more heat and watch it flow into the coil and as it cools becomes solid.

Then I wrap tape around it to hold everything in place. I cannot emphasize enough how fiddly this is. There are a few stray wires and if any of them break I'm starting again.

It may not be much to look at but its taken hours. The slight curve is to match the shape of the pickup casing. I've tested it and I'm pleased with it at 5.5Kohms.
 In the background you can see the magnetic lugs - I had to dig them out of the putty.

 I put the whole thing back together using 'friendly plastic' instead of putty then fill the casing with wax, solder the back on and its finished.

 Its been quite a task but I'm happy with the result.

   Glyn



………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com