“Cloud Nine”-hot humbucker

 

“Cloud Nine”-hot humbucker

The “Cloud Nine”-hot humbucker is a versatile ROCK pickup with plenty of mids, plenty of power but with enough clarity to help you stand out in the mix.

I am at heart a man of ROCK.

Since the advent of the DiMarzio Super Distortion players have been able to get some power out of their pickups, enough to really push an amp.

The neck pickup needed to be clear and present but with enough power for some of those sweet lead lines. I wanted the bridge pickup to have power to scream with the best of them while retaining enough clarity to have definition. When I play a 7th chord I want to hear it as a 7th and not sound mushy like a John Deere tractor at full throttle. It’s a real danger with hot pickups that they lose character and tone. I needed a crunchy rhythm with strong mids and an over the top lead sound. I want to get squawking pinched harmonics whenever I please. Not only that but I need it it to clean up nicely and react well to a treble bleed circuit. A humbucker for every situation, for players not afraid of a bit of gain.

Not much to ask, eh!

I got through a lot of wire and magnets experimenting over the years to get this set right. I suppose I worked on it for about 5 years, different magnets, winds, wire thickness, insulation, winds per layer – there are a lot of factors. Whenever I felt I was close I used them at a gig to hear how they sat in the band. Pickups can sound quite different next to a drummer or in a mix. I tweaked and adjusted…

Eventually I was happy with the design and I was lucky enough to have legendary Kiwi band ‘Head Like A Hole’ help out with road testing. I knew if they came back from tour happy then I was on to a winner. They did.

When you get it right it feels so good, a sensitive pickup rich in harmonics is so much fun so I called it the “Cloud Nine” which how I felt at the end of it all.

This is the pickup set I gig with myself in my covers band now. I have them in an Epiphone Sheraton with treble bleeds on the volume pots. With this set up it works for everything from The Smiths to Metallica and all points in between. I don’t feel the need to swap guitar – these pickups work for everything.

Here are some sound samples recorded clean through a Fender Princeton Reverb-Amp. The overdrive sounds are using an Electroharmonix Soul Food. The guitar is a ’98 Les Paul Std with D’Addario 10-52’s. All of them with the same guitar, same amp, same settings, no reverb or eq added later.

Neck Pickup Clean

Bridge Pickup Clean

Middle Position Clean

Neck Pickup with Overdrive

Bridge Pickup with Overdrive

Middle Position with Overdrive

Cloud Nine humbucker

https://www.youtube.com/c/MrGlynsPickups/videos

7 String Humbucker - “Attitude” by MrGlyn’s Pickups

 Thinking of a 7 String Humbucker for modern metal/fusion? 

MrGlyn’s “Attitude” humbucker (6 or 7 string) was developed in collaboration with Graham Young in the UK. He’s a pretty demanding player with an amazing ear for detail. 

For the full story of how we did it and for more demos go to my blog:

https://mrglynspickups.com/2021/05/17/7-string-humbucker/

https://www.facebook.com/grahammarkyoung/videos/10159284278801800/?t=0

 

 

Attitude humbucker - Mr Glyn's Pickups

 

For a while I’ve been working on extending my range of humbucking pickups for rock players. The Cloud Nine will do just about anything but I wanted to offer a more specific pickup for modern rock/metal.

I decided to start with a 7 string which is a slightly unorthodox way of going about it but I was concerned with getting the bottom end right. If there was any sogginess in the bottom end a 7 string would show it up more than a 6 string.

7 string pickups are not like others. The low bass string reacts so differently, there’s a lot of string deflection and low harmonics. My mission was to tame this bass and keep it tight but not to sacrifice the sound quality of the treble strings. The treble still needed to be sweet and singing. The mids needed to be balanced and noticeable. I didn’t want this pickup scooped; the mids had to stand out from the mix when needed to.

So in October 2019 I got back in touch with my old mate Graham Young in Yorkshire. He’s an amazing player and really knows his gear.

Back in 1998 I wound a 6 string humbucker for Graham. In those days I had a guitar shop and repair business in Leeds in the North of England and he wanted a bridge pickup to suit his style for a parts caster.

Years passed and he became a 7 string player, so when I decided to develop a 7 string pickup Graham was the person I asked to be test pilot. We’d very loosely kept in touch over the years and it turned out he was still using the 6 string pickup I’d made for him back in the 90’s.

We had a chat via messenger and it turned out he’d tried a lot of pickups but none quite did it for him. So I listened to his thoughts, came up with a design and went away and made a prototype.

The first one wasn’t quite right, so he sent it back and I changed a few things and returned it. I don’t know how many adjustments I made but that pickup accumulated quite a few air miles between NZ and the UK over the next few months.

Every time we got closer, every adjustment less than the one before. When you get that close you know you’ve got a good pickup. I was at the point when I felt we really had something great but I just needed that confirmation.

Then Covid 19 happened, the mail got too unreliable to send stuff overseas with any confidence of it arriving and the process was put on hold.

At the end of June 2020 I got a call from Gabe Dovaston in Papamoa. He’d done some demos for me with some of my other pickups and was asking if I did a 7 string, just in case, for an Ibanez of his. Well, this seemed like a chance to test my new pickup on fresh ears. I made a copy of the last one I’d sent Graham, the one I was happy with, and got it off in the post. I sat back and waited. It only took a few days and I got a very happy call, he loved it and he’d already made a demo that he’d put on YouTube.

Great news, but what was I going to call it? The pickup was already on YouTube, it wasn’t on my website yet and it didn’t even have a name!

I got on Facebook and asked people to come up with a name; there were so many excellent suggestions but nothing quite did it. In the end this pickup that had taken so much work to develop, traveled so far and refused to go away I called the “Attitude”.

The Attitude is available in 6 and 7 string, for neck and bridge positions.

https://mrglynspickups.com/

MrGlyn’s Pickups “Integrity” humbucker demo

A big thanks to Nik Dobbin for this MrGlyn’s Pickups “Integrity” humbucker demo

https://mrglynspickups.com/2020/03/29/blue-sky-vintage-humbucker/

Every pickup manufacturer makes a “Vintage” humbucker based on the Gibson PAF, of course they do – old Gibsons sound so good.

So how come they all sound so different? Well, the simple answer is that PAF’s were all different. I’ve been a full time luthier since 1995, whenever I come across an old humbucker I test the ohms and the gause and have a good listen. They’re all different. My conclusion is that pickup manufacturers have taken the PAF they like and based their own version on that. Old PAF’s vary so much so modern ones do as well.

I like my own version to be clear sounding, have obvious string separation and definition and to keep clarity no matter how much gain. The mids must be strong and woody, this is not a “scooped” pickup. The clean sound needs to be chimey and clear with no mush; through a valve amp I want clarity. When I tickle it I want clean and vocal sounding when it clips. The bridge pickup needs to be well behaved with high gain and clear with enough cut through so the drummer knows you’re there. The neck smooth, clear and articulate. Warm but with none of the boom you get with a more powerful pickup.

I don’t want much do I.

My “Vintage” Humbucker has an Alnico II magnet and I’ve used plain enamel insulated magnet wire with asymmetric coils to open up the mids. The very first pickup I ever made back in 1995 was a PAF style and I’ve been tweaking the recipe ever since. Like all my pickups I’ve used a number of test pilot players in its development as well as gigging it myself. It wasn’t until around 2015 that I settled on this particular design. I did a gig with a set in a PRS SE series only last weekend – sounded great to me.

The full and honest sound of this pickup along with it’s timeless tone inspired the name “Integrity”.

https://mrglynspickups.com/

7 string humbucker

7 string humbucker - "Attitude"

For a while I’ve been working on extending my range of humbucking pickups for rock players. The Cloud Nine will do just about anything but I wanted to offer a more specific pickup for modern rock/metal.

I decided to start with a 7 string which is a slightly unorthodox way of going about it but I was concerned with getting the bottom end right. If there was any sogginess in the bottom end a 7 string would show it up more than a 6 string.

7 string pickups are not like others. The low bass string reacts so differently, there’s a lot of string deflection and low harmonics. My mission was to tame this bass and keep it tight but not to sacrifice the sound quality of the treble strings. The treble still needed to be sweet and singing. The mids needed to be balanced and noticeable. I didn’t want this pickup scooped; the mids had to stand out from the mix when needed to.

So in October 2019 I got back in touch with my old mate Graham Young in Yorkshire. He’s an amazing player and really knows his gear.

Back in 1998 I wound a 6 string humbucker for Graham. In those days I had a guitar shop and repair business in Leeds in the North of England and he wanted a bridge pickup to suit his style for a parts caster.

Years passed and he became a 7 string player, so when I decided to develop a 7 string pickup Graham was the person I asked to be test pilot. We’d very loosely kept in touch over the years and it turned out he was still using the 6 string pickup I’d made for him back in the 90’s.

We had a chat via messenger and it turned out he’d tried a lot of pickups but none quite did it for him. So I listened to his thoughts, came up with a design and went away and made a prototype.

The first one wasn’t quite right, so he sent it back and I changed a few things and returned it. I don’t know how many adjustments I made but that pickup accumulated quite a few air miles between NZ and the UK over the next few months.

Every time we got closer, every adjustment less than the one before. When you get that close you know you’ve got a good pickup. I was at the point when I felt we really had something great but I just needed that confirmation.

Then Covid 19 happened, the mail got too unreliable to send stuff overseas with any confidence of it arriving and the process was put on hold.

At the end of June 2020 I got a call from Gabe Dovaston in Papamoa. He’d done some demos for me with some of my other pickups and was asking if I did a 7 string, just in case, for an Ibanez of his. Well, this seemed like a chance to test my new pickup on fresh ears. I made a copy of the last one I’d sent Graham, the one I was happy with, and got it off in the post. I sat back and waited. It only took a few days and I got a very happy call, he loved it and he’d already made a demo that he’d put on YouTube.

Great news, but what was I going to call it? The pickup was already on YouTube, it wasn’t on my website yet and it didn’t even have a name!

I got on Facebook and asked people to come up with a name; there were so many excellent suggestions but nothing quite did it. In the end this pickup that had taken so much work to develop, traveled so far and refused to go away I called the “Attitude”.

The Attitude is available in 6 and 7 string, for neck and bridge positions.

www.mrglynspickups.com

"Attitude" Humbucker Demo

A huge thanks to Gabe at The Music Academy Papamoa for his "Attitude" Humbucker Demo.

Mr Glyn's Attitude Humbucker Set

For a while I’ve been working on extending my range of humbucking pickups for rock players. The Cloud Nine will do just about anything but I wanted to offer a more specific pickup for modern rock/metal.

I decided to start with a 7 string which is a slightly unorthodox way of going about it but I was concerned with getting the bottom end right. If there was any sogginess in the bottom end a 7 string would show it up more than a 6 string.

7 string pickups are not like others. The low bass string reacts so differently, there’s a lot of string deflection and low harmonics. My mission was to tame this bass and keep it tight but not to sacrifice the sound quality of the treble strings. The treble still needed to be sweet and singing. The mids needed to be balanced and noticeable. I didn’t want this pickup scooped; the mids had to stand out from the mix when needed to.

So in October 2019 I got back in touch with my old mate Graham Young in Yorkshire. He’s an amazing player and really knows his gear.

Back in 1998 I wound a 6 string humbucker for Graham. In those days I had a guitar shop and repair business in Leeds in the North of England and he wanted a bridge pickup to suit his style for a parts caster.

Years passed and he became a 7 string player, so when I decided to develop a 7 string pickup Graham was the person I asked to be test pilot. We’d very loosely kept in touch over the years and it turned out he was still using the 6 string pickup I’d made for him back in the 90’s.

We had a chat via messenger and it turned out he’d tried a lot of pickups but none quite did it for him. So I listened to his thoughts, came up with a design and went away and made a prototype.

The first one wasn’t quite right, so he sent it back and I changed a few things and returned it. I don’t know how many adjustments I made but that pickup accumulated quite a few air miles between NZ and the UK over the next few months.

Every time we got closer, every adjustment less than the one before. When you get that close you know you’ve got a good pickup. I was at the point when I felt we really had something great but I just needed that confirmation.

Then Covid 19 happened, the mail got too unreliable to send stuff overseas with any confidence of it arriving and the process was put on hold.

At the end of June 2020 I got a call from Gabe Dovaston in Papamoa. He’d done some demos for me with some of my other pickups and was asking if I did a 7 string, just in case, for an Ibanez of his. Well, this seemed like a chance to test my new pickup on fresh ears. I made a copy of the last one I’d sent Graham, the one I was happy with, and got it off in the post. I sat back and waited. It only took a few days and I got a very happy call, he loved it and he’d already made a demo that he’d put on YouTube.

Great news, but what was I going to call it? The pickup was already on YouTube, it wasn’t on my website yet and it didn’t even have a name!

I got on Facebook and asked people to come up with a name; there were so many excellent suggestions but nothing quite did it. In the end this pickup that had taken so much work to develop, traveled so far and refused to go away I called the “Attitude”.

The Attitude is available in 6 and 7 string, for neck and bridge positions.