The Guitar Knobs Podcast

Had a great time chatting with the guys at The Guitar Knobs Podcast the other day. We talked about pickup design, methods of construction, materials and my favourite pedals.

If you want to hear more, here’s a chat with The Australian Guitar Show from 2021. https://www.youtube.com/watch?v=X-t1MWB87hY&t=13s

MrGlyn’s Pickups is based at Muriwai Beach near Auckland, New Zealand. From low powered “vintage” to powerful rock monsters. We care about your tone.

Mr Glyn’s Pickups

My Story

My name is Glyn Evans. I have been a full time pickup winder and luthier since 1995.

I wound my first pickup under the guidance of legendary guitar repairer Ted Lee while studying guitar making/repair under him at City of Leeds College of Music in the North of England.

There’s something about the physics that really appealed to me. I went straight home, built my own winding machine, bought some wire and started experimenting.

In those pre-internet days there just wasn’t any information available on how to make good pickups. I made pickup after pickup, I wound and I listened. I made notes of every variation both good and bad so I could learn what was happening.

Looking back I think that time was invaluable for developing an intuition for making pickups. Whenever I came across a result I didn’t understand I swatted up on the physics; there’s a lot to learn. I wrote all the experiments down in a notebook, I still have the notebook and I’m still adding to it. https://mrglynspickups.com/

In 2012 I had the idea for my own range of pickups. In 2020 MrGlyn’s Pickups website went live.

I’ve been lucky enough to know many professional players who’ve given their time and expertise to help me. Every pickup design I make has been tested both by me and some of these “test pilots”. They’ve been in and out of numerous guitars, recorded, gigged, analysed and altered more times than I can remember.

I am really happy with the results, I hope you will be too.

Mr Glyn’s Pickups Logo – Roboguy

The Guitar Knobs Podcast

“TheTron” - by Mr Glyn's Pickups

 TheTron pickup set is based around the legendary Gretsch pickups Of the 50’s and 60’s. To say TheTron has character is an understatement. TheTron is full and rounded with a well balanced mid range but with that distinctive ‘Clank’ that separates it from other pickups. The neck pickup is clear and fat and the bridge stands out from the mix without ever sounding harsh.

Over the years I’ve repaired a fair few old Gretsch pickups and noticed the best sounding ones are at the upper range for ohms. I’ve taken that design and tweaked it until I got the fullness I was looking for but without loosing clarity or clank.

Most of my pickups are made in collaboration with a professional player, but not TheTron. I started playing guitar at the age of 16 when I first heard Malcolm Young – a Filtertron through an almost clean valve amp. I didn’t feel I needed another set of ears for this one, I knew exactly what I wanted.

I needed this pickup set to be crystal clear with a clean amplifier but to come into its own when pushing an amp to clip. The neck pickup needed to be clear, full and chiming in both a big archtop and in the neck position of a Telecaster. The bridge pickup needed to have no shortage of character, a clean almost jangly tone when played gently but with enough go in it to push the front end of a valve amp to clip when you dig in.

TheTron is the perfect pickup as a Gretsch upgrade, for the modern player wanting something other than Gibson style humbuckers, rockabilly players after that traditional tone, jazz players or, like me, Malcolm Young fans. There’s so much you can to with The Tron.

For the modern player with one foot in the past.

 

And as for the name “TheTron”? – I think you have to be a Kiwi…

 

 https://mrglynspickups.com/2021/09/22/thetron/

 https://mrglynspickups.com/

 

Integrity vintage humbucker set - Mr Glyns Pickups

 

“Integrity”-vintage humbucker

The “Integrity”-vintage humbucker is a low powered Alnico II humbucker in the style of the early PAF’s.

Every pickup manufacturer makes a “Vintage” humbucker based on the Gibson PAF, of course they do – old Gibsons sound so good.

So how come they all sound so different? Well, the simple answer is that PAF’s were all different. I’ve been a full time luthier since 1995, whenever I come across an old humbucker I test the ohms and the gause and have a good listen. They’re all different. My conclusion is that pickup manufacturers have taken the PAF they like and based their own version on that. Old PAF’s vary so much so modern ones do as well.

I like my own version to be clear sounding, have obvious string separation and definition and to keep clarity no matter how much gain. The mids must be strong and woody, this is not a “scooped” pickup. The clean sound needs to be chimey and clear with no mush; through a valve amp I want clarity. When I tickle it I want clean and vocal sounding when it clips. The bridge pickup needs to be well behaved with high gain and clear with enough cut through so the drummer knows you’re there. The neck smooth, clear and articulate. Warm but with none of the boom you get with a more powerful pickup.

I don’t want much do I.

My “Vintage” Humbucker has an Alnico II magnet and I’ve used plain enamel insulated magnet wire with asymmetric coils to open up the mids. The very first pickup I ever made back in 1995 was a PAF style and I’ve been tweaking the recipe ever since. Like all my pickups I’ve used a number of test pilot players in its development as well as gigging it myself. It wasn’t until around 2015 that I settled on this particular design. I did a gig with a set in a PRS SE series only last weekend – sounded great to me.

The full and honest sound of this pickup along with it’s timeless tone inspired the name “Integrity”.

Is pickup was originally called the “Blue Sky”.

Here are some sound samples recorded clean through a Fender Princeton Reverb-Amp. The overdrive sounds are using an Electroharmonix Soul Food. The guitar is a ’98 Les Paul Std with D’Addario 10-52’s. All of them with the same guitar, same amp, same settings, no reverb or eq added later.

Neck Pickup Clean

Bridge Pickup Clean

Middle Position Clean

Neck Pickup with Overdrive

Bridge Pickup with Overdrive

Middle Position with Overdrive

The ‘Integrity’ used to be called the ‘Blue Sky’

Bellbird - vintage Strat pickup set

 

The Stratocaster has been around since 1954 and the legend continues. Reading the internet (!?) tells me there have been good and bad years or decades, guitars to avoid and ones worth hundreds of thousands of dollars. I’ve been repairing guitars since 1995 so I’ve played a lot of old Strats and analysed a lot of old pickups. Vintage pickups aren’t all great but the good ones are fantastic.

I’ve based my Vintage Strat set on the best of the old pickups I’ve had the pleasure of playing through . So I use AWG42 heavy formvar insulated wire – there’s something about the thickness of that insulation that just works with an old Strat pickup.

I’ve aimed for that old quacking chime that makes Strats wonderfully percussive but with a singing quality that’s so musical. Warm and clear with beautiful almost reverb-like clean tones – that’s what I want out of an old Strat. The neck needs to be fat, round and clear, the middle pickup needs to quack and the bridge a cut through twang without thinness. The all important ‘in between’ sounds in positions 2 and 4 must be balanced and characterful. Nothing says Strat more than these sounds.

The Bellbird set has been designed mainly for clean tones but they’re certainly not afraid to perform with a bit of gain. As part of a HSS set they’re great with one of my ‘Integrity’ humbuckers in the bridge position.

I agonised for months over names for my Strat pickup sets then during a camping trip to Tauwharanui Regional Park I heard my first Bellbird and realised that was the sound I had been looking for when I was designing this set. The comparison in tone between the Bellbird and the more common Tui seemed exactly what I had in my head when designing my Strat pickups. Bellbirds don’t just go tweet, there’s a depth and warmth in the tone. It’s so hard to describe sound and the difference between pickups but I think the difference between the Bellbird and the Tui sum up the difference between my vintage and hot Strat pickups. So I called them the Bellbird and the Tui.

These sound samples should show you what I mean:

Bellbird:

Tui:

Here are some sound samples recorded clean through a Fender Princeton Reverb-Amp. The overdrive sounds are using an Electroharmonix Soul Food. The guitar is an Alder body Strat with rosewood fretboard strung with D’Addario 10-52’s. All of them with the same guitar, same amp, same settings, no reverb or eq added later.

Bellbird Neck Pickup Clean

Bellbird Neck and Middle Pickups Clean

Bellbird Middle Pickup Clean

Bellbird Middle and Bridge Pickups Clean

Bellbird Bridge Pickup Clean

Bellbird Neck Pickup with Overdrive

Bellbird Neck and Middle with Overdrive

Bellbird Middle with Overdrive

Bellbird Middle an Bride Pickups with Overdrive

Bellbird Bridge Pickup with Overdrive

https://www.youtube.com/c/MrGlynsPickups/videos

MrGlyn’s Pickups Bellbird demo

 Thanks to Jason Herbert for managing to use all 5 positions in the funkiest minute you’ll ever experience in this MrGlyn’s Pickups Bellbird demo.

The Bellbird pickup set is a vintage voiced Strat set reminiscent of the early 60's Fender pickups.

The Stratocaster has been around since 1954 and the legend continues. Reading the internet (!?) tells me there have been good and bad years or decades, guitars to avoid and ones worth hundreds of thousands of dollars. I’ve been repairing guitars since 1995 so I’ve played a lot of old Strats and analysed a lot of old pickups. Vintage pickups aren’t all great but the good ones are fantastic.

I’ve based my Vintage Strat set on the best of the old pickups I’ve had the pleasure of playing through . So I use AWG42 heavy formvar insulated wire – there’s something about the thickness of that insulation that just works with an old Strat pickup.

I’ve aimed for that old quacking chime that makes Strats wonderfully percussive but with a singing quality that’s so musical. Warm and clear with beautiful almost reverb-like clean tones – that’s what I want out of an old Strat. The neck needs to be fat, round and clear, the middle pickup needs to quack and the bridge a cut through twang without thinness. The all important ‘in between’ sounds in positions 2 and 4 must be balanced and characterful. Nothing says Strat more than these sounds.

The Bellbird set has been designed mainly for clean tones but they’re certainly not afraid to perform with a bit of gain. As part of a HSS set they’re great with one of my ‘Integrity’ humbuckers in the bridge position.

www.mrglynspickups.com

Hofner Pickup re-wind

I had a visit from Paul Crowther the other day (always a pleasure to see him). He's rather a legend for amongst other things his 'Hotcake' overdrive pedals and the 'Prunes and Custard' (my favorite for theremin).

http://en.wikipedia.org/wiki/Emlyn_Crowther

 He wanted to know if my coil winding machine was up and running -  he had an interesting pickup for me to wind.

 Its an old Hofner pickup which I guess is from the 50's. The guitar has 3 of them and this one has a break in the windings so needs to be re-wound.
This would normally be a straight forward job except for the design of this pickup.

 This is the inside of it. The windings (around the outside) are not wrapped around a bobbin. They are just sitting in the pickup and have been wrapped in tape to protect them. In the middle you can see the magnets sitting in a hard putty. There are incidentally only 5 magnets.
 So the problem Paul left me with was how to wrap about 5000 turns of extremely thin wire into a coil and therefore make a pickup.
 After a long brainstorming session with Sheena we came up with a plan.

 We figured that the wire had to be wound around a bobbin and then somehow the bobbin removed.

 So I made this bobbin. The sides are plastic from a Strat pickguard (white) and the centre has been carved from candle wax.

The bobbin bolts together and is attached to another plastic plate which in turn fits to the winding machine.
 The idea is to wind the pickup on this and then warm the completed coil up and melt the wax. The wax should seep into the coil thus potting it as well. Then the sides can be unbolted and voila a copy of the original coil.

 Winding the coil wasn't any different from any other pickup - so now for the tricky bit.

 I warm the coil ever so gently with a heat gun. I put my free hand next to the work to judge the temperature - if it gets too hot the plastic will melt and I'll be starting again.

 When I see some wax oozing out I ever so gently remove the top plate.

 With the wax exposed I can apply more heat and watch it flow into the coil and as it cools becomes solid.

Then I wrap tape around it to hold everything in place. I cannot emphasize enough how fiddly this is. There are a few stray wires and if any of them break I'm starting again.

It may not be much to look at but its taken hours. The slight curve is to match the shape of the pickup casing. I've tested it and I'm pleased with it at 5.5Kohms.
 In the background you can see the magnetic lugs - I had to dig them out of the putty.

 I put the whole thing back together using 'friendly plastic' instead of putty then fill the casing with wax, solder the back on and its finished.

 Its been quite a task but I'm happy with the result.

   Glyn



………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com