Integrity humbucker in a HSS Strat

Had some fun today making a short stop-motion movie of Roboguy to demonstrate an Integrity humbucker in a HSS Strat.

The 'real' guitar is being played by Warren Mendonsa aka Blackstratblues.

Of course, any of my humbuckers will work as part of a HSS Strat set but I think the Integrity matches single coil pickups best.

For more demos of this pickup have a look here: https://mrglynspickups.com/2020/03/29/integrity-vintage-humbucker-2/

Inspired by the early Gibson PAF pickups the Integrity-vintage humbucker give the classic full, balanced tone we all love. Asymmetric coils give an open sounding mid range and the Alnico II magnet gives clarity and balance. A rich bottom end, characterful mids and sweet treble make this a pickup set for every situation – Jazz, Blues, Rock, it does it all.

Every pickup manufacturer makes a “Vintage” humbucker based on the Gibson PAF, of course they do – old Gibsons sound so good.

So how come they all sound so different? Well, the simple answer is that PAF’s were all different. I’ve been a full time luthier since 1995, whenever I come across an old humbucker I test the ohms and the gause and have a good listen. They’re all different. My conclusion is that pickup manufacturers have taken the PAF they like and based their own version on that. Old PAF’s vary so much so modern ones do as well.

I like my own version to be clear sounding, have obvious string separation and definition and to keep clarity no matter how much gain. The mids must be strong and woody, this is not a “scooped” pickup. The clean sound needs to be chimey and clear with no mush; through a valve amp I want clarity. When I tickle it I want clean and vocal sounding when it clips. The bridge pickup needs to be well behaved with high gain and clear with enough cut through so the drummer knows you’re there. The neck smooth, clear and articulate. Warm but with none of the boom you get with a more powerful pickup.

I don’t want much do I.

My “Integrity”-vintage humbucker has an Alnico II magnet and I’ve used plain enamel insulated magnet wire with asymmetric coils to open up the mids. The very first pickup I ever made back in 1995 was a PAF style and I’ve been tweaking the recipe ever since. Like all my pickups I’ve used a number of test pilot players in its development as well as gigging it myself. It wasn’t until around 2015 that I settled on this particular design. I did a gig with a set in a PRS SE series only last weekend – sounded great to me.

The full and honest sound of the Integrity-vintage humbucker along with it’s timeless tone inspired the name “Integrity”. https://mrglynspickups.com/

Mr Glyn's Pickups Logo - Roboguy

Integrity humbucker in a HSS Strat

Minx – mini humbucker

 If you love your mini humbucker guitar but want a bit more power than standard Deluxe style pickups the ‘Minx’ mini humbucker is the pickup for you.

The Minx has plenty of that mini humbucker clarity and tonality but with more power and more grit.

The ‘Minx’ is a clean clear sounding mini humbucker but with more power than the vintage Gibson’s. There is warmth and clarity but with more powerful windings than the ‘Mini’ along with an alnicoV magnet they will push your amp harder.

AlnicoV – Bridge 10.5 KOhms, AlnicoV – Neck 6.6KOhms

With narrower coils than a PAF mini humbuckers ‘hear’ a narrower part of the string resulting in cleaner highs, a less pushy lower mid range and a distinctive clear bass that’s never woofy or wooly.

The neck pickup has the same coils as the ‘Mini’ but with an alnicoV magnet they have a fatter power and make a great match to the Minx bridge pickup.

The bridge pickup has a characterful mid range with a bite and fullness that is lacking in most mini humbuckers. You wouldn’t describe this pickup as polite and it will certainly put you towards the front of any mix.

Great for the blues or rock player after dynamics – tickle it and it’s clean but when you dig in there’s enough power to push the front end of your amp into break up when you ask it to.

Although he Les Paul Deluxe was a short lived guitar in the Gibson range the mini humbucker has lived on. It is a very popular pickup in custom guitars particularly the neck pickup and is a great match for Mr Glyn’s ‘Cruel Mistress’ telecaster bridge pickup.

If you’re looking for a pickup that is clearer than a PAF, has a less prominent lower mid spike with an even balanced tone then the mini humbucker could be the pickup for you.

For a lower powered mini humbucker take a look at the ‘Mini’ https://mrglynspickups.com/2021/11/12/mini-humbucker/

https://mrglynspickups.com/

Clear View humbucker

The "Clear View" humbucker is something different. It's a humbucker for players that don't like humbuckers.

This pickup set is all about pure clarity. There are no pushy lower mids that make your clean sound a mush. The highs are clean and clear but not harsh, the bottom end is clear but with none of that humbucker woof.

If single coils are too harsh and unforgiving, conventional humbuckers too powerful and muddy then here's the solution. The "Clear View" humbucker is low powered and balanced, designed for the textural player, great with reverbs and modulation, sits its the mix without getting in the way.

If you want a low powered ‘Vintage’ humbucker with all the character of a PAF get a MrGlyn’s ‘Integrity’ humbucker. If humbuckers sound too thick and you crave extra clarity then the ‘Clear View’ is for you.

And, of course, it’s hum cancelling.

This is not a pickup born to rock, it's more than that.

Here's a short video, to show the clarity and balance of the "clear View" Pickups.

The Clear View Story

It started with a phone call from luthier Ramsay Phillips.

I've got huge respect for Ramsay, he's worked all over the world and has a great client list (including Steve Vai). He knows guitars, knows tone and he's a thinker. So when he calls to talk about a new pickup idea I listen.

He was interested in having a humbucker for people that didn’t like humbuckers (his phrase). A pickup with clear tone and low powered but not like a PAF, clearer than that. He wanted a midrange more like a single coil than a traditional humbucker. At first I thought my ‘Black Sand’ humbucker size P90 would suit him but as he talked I realised he didn’t want the grit of a P90. He’s very well practiced at describing sound so I felt I understood what he meant. He assured me he had customers asking about such a pickup.

He wasn’t in a rush which meant I could have a good ponder over what he’d said before making anything.

Then one morning about a week later I was out on the beach with the dogs. There was quite a big swell (the sea is never calm at Muriwai) and I was listening to the sea. I was trying to figure out which frequencies in that sound I would need to remove to make Ramsay’s pickup. By the time I got home there was a plan.

I made a set of pickups, sent them to him and a few days later he called to say they were spot on. It isn’t usually that easy.

https://mrglynspickups.com/2021/08/20/clear-view-humbucker/