Had some fun today making a short stop-motion movie of Roboguy to demonstrate an Integrity humbucker in a HSS Strat.
The 'real' guitar is being played by Warren Mendonsa aka Blackstratblues.
Of course, any of my humbuckers will work as part of a HSS Strat set but I think the Integrity matches single coil pickups best.
For more demos of this pickup have a look here: https://mrglynspickups.com/2020/03/29/integrity-vintage-humbucker-2/
Inspired by the early Gibson PAF pickups the Integrity-vintage humbucker give the classic full, balanced tone we all love. Asymmetric coils give an open sounding mid range and the Alnico II magnet gives clarity and balance. A rich bottom end, characterful mids and sweet treble make this a pickup set for every situation – Jazz, Blues, Rock, it does it all.
Every pickup manufacturer makes a “Vintage” humbucker based on the Gibson PAF, of course they do – old Gibsons sound so good.
So how come they all sound so different? Well, the simple answer is that PAF’s were all different. I’ve been a full time luthier since 1995, whenever I come across an old humbucker I test the ohms and the gause and have a good listen. They’re all different. My conclusion is that pickup manufacturers have taken the PAF they like and based their own version on that. Old PAF’s vary so much so modern ones do as well.
I like my own version to be clear sounding, have obvious string separation and definition and to keep clarity no matter how much gain. The mids must be strong and woody, this is not a “scooped” pickup. The clean sound needs to be chimey and clear with no mush; through a valve amp I want clarity. When I tickle it I want clean and vocal sounding when it clips. The bridge pickup needs to be well behaved with high gain and clear with enough cut through so the drummer knows you’re there. The neck smooth, clear and articulate. Warm but with none of the boom you get with a more powerful pickup.
I don’t want much do I.
My “Integrity”-vintage humbucker has an Alnico II magnet and I’ve used plain enamel insulated magnet wire with asymmetric coils to open up the mids. The very first pickup I ever made back in 1995 was a PAF style and I’ve been tweaking the recipe ever since. Like all my pickups I’ve used a number of test pilot players in its development as well as gigging it myself. It wasn’t until around 2015 that I settled on this particular design. I did a gig with a set in a PRS SE series only last weekend – sounded great to me.
The full and honest sound of the Integrity-vintage humbucker along with it’s timeless tone inspired the name “Integrity”. https://mrglynspickups.com/
Integrity humbucker in a HSS Strat
