So what guitars do I use?

 Over the years I've managed to wittle down the amount of guitars I own.
It's not easy parting with instruments but I feel if they're not getting played then they're not earning their keep. We all have stories of the one we should never have sold - oh I miss my '65 Duosonic.
 So I'm down to only 3 electric guitars. None of them expensive but all 3 have that magic 'something'.

This is a 'bitsa' Tele.
 The body is from Allparts and its a really light piece of Swamp Ash. Swamp Ash is lighter and airier sounding than other ash. With the large metal bridge and maple neck I needed to mellow out the tone of this guitar while keeping the essence of the Telecaster sound. Swamp Ash does this.
I've finished it with Danish Oil so as not to impede the resonance of the timber. This guitar just gets better with age - the more its played and the harder its played the better it gets (If only cars were like that).

 The neck is from a mid 90's 'Made in Japan' Squire. They are really fat club like necks so it was ideal as a blank for me to re-shape. It's slab cut and pretty rigid and stable.
I've given it a very slight 'V' profile, keeping the depth but removing a lot of wood from the sides. I removed the headstock logo and re-finished the neck with matt nitrocellulose lacquer. One of these days I'll get around to re-fretting it - they are still the original frets.

 All the hardware is USA made Allparts except the tuners which are still Squire. It has the Fender 4-way switch to get the extra humbucker sound although I never use it. I want my Tele to do Tele stuff and that just doesn't fit. I don't want versatility - if a guitar can do one or two things well then I'm happy. Its got the TBX tone control which I leave set to the middle. I have occasionally turned it to the more treble setting towards the end of a long gig when my treble hearing's going but try not to.

 The pickups are Texas Specials which I was never 100% happy with so I've re-wound them. I scatter wound them to be a wee bit hotter than vintage spec and its opened the sound up a huge amount - so much more clarity.


I've kept the look as simple and traditional as possible - for me that's what Telecasters are about.


Stratocaster

 This is a ROCK monster! This Frankenstrat has one purpose and that's when I play in a rock covers band. Its a Chinese made Axe Tech (?) and cost $90NZ second hand. It weight almost nothing and fits like a glove - important when doing 4 hour gigs.

 The fretboard has been re-radiused to 20" (very flat) and fretted with narrow jumbo fretwire. After an accident at a gig I re-finished the neck with shellac which feels great. The action is low with D'Addario 10-52 in E flat. This is a fast guitar built for stage use.
I've removed a fair bit of the finish on the body to open the sound up.

 The trem is blocked off and the posts re-mounted in hardwood inserts which brought a lot more life to the sound.

 The pickups are Seymour Duncan JB and Jazz. They have a fantastic generic rock sound which works really well for covers. There's not a lot of character in them but they can sound close enough to most things. The middle pickup's a dummy.
 The 5-way switch gives me JB humbucking, JB in parallel, JB and Jazz in parllel, Jazz in parallel, Jazz humbucking. Works for me.

 The third one is my archtop.

It's a copy of a Gibson L5 made by Hondo in the early 70's. Its one of the ones that actually came out of the Ibanez factory. It's huge and uncomfortable but I love it. There's such a huge fat sound in there.

 For amplification I'm using a vintage Carlsbro TC60R. I believe this model was discontinued in 1973. Its an all valve 1x12 combo with ECC83's and EL34's. Is got 2 channels and reverb.


There's no master volume so it just does loud and clean. I get overdrive from a boss pedal. Using both channels that gives me 4 basic sounds - loud and louder, clean and dirty.
 For rock gigs I take the amplifier out of the combo and slot it into a head I made for it and run a Laney 4x12. That gives so much more punch and direction to the sound - completely different.

 So that's my set up - simple really. I do try not to buy guitars but who knows what temptation is around the corner.

Glyn



………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com

Gibson Tennessee nut repair

  This is an unusual guitar - It's a 1990 Gibson Tennessee Chet Atkins model. Here's the serial number, the first and fifth number tell me the year. I think it was '76 they started this system. Gibson's website is good for dating older ones.

 The guitar had a buzzing open 'A' string. All the others were fine. The problem was the string slot at the top-nut was too deep. This leaves me with a choice - make a new bone nut-
although this guitar is not old it is certainly unusual and will no doubt be a serious collector's item in the future. The original nut has distinctive lacquer on its ends and it is only one string that's too low.
- repair the existing one-
 I decided to do this by what I call 'giving it a filling'.

 Firstly I opened up the string slot using a gent saw to a width about 1.5mm wider than the string (0.75mm either side). And about 1mm deeper than the existing slot.

 I carve a piece of bone from an old nut off cut to fit in the slot exactly but to protrude above the slot so I can trim it off later.

 I mask off the fretboard and head with tape just in case. Then I glue the piece of bone in with 'Hotstuff' super glue.

 After a couple of minutes the glue is completely dry and I can file and sand the new piece flush with the nut.

 Then its just a case of filing the nut slot to the right depth as I would in a set up.

 This 'filling' method works really well, is almost undetectable and gives the string a fresh, clean slot to slide in.


   I wonder if I could do the same to my front tooth?

    Glyn




………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com

Fender Bronco fretboard repair

This one is a 'real' repair, in the sense that something is broken. Its a Fender Bronco which is an instrument I very rarely see.

It is by no means a new guitar but it still gets regularly gigged and toured with NZ punk band Die!Die!Die!

http://en.wikipedia.org/wiki/Die!_Die!_Die!

 For more info on the Fender Bronco take a look at:

 http://www.fenderbronco.com/id2.html

It spent a brief few days at my workshop between a UK and an Australian tour. The main priority was sorting out the electrics, a missing fret (!), and some set up problems. I also took the opportunity to repair a missing chunk of fretboard.

It looks to me like the neck has has an accident with a mic stand. The maple of the neck has been dented and a chunk of rosewood snapped off along with a fret. I've put a new fret in and need to replace the piece of fretboard before I can file the fret end to match the existing frets.

 I find a piece of rosewood that is a good colour and grain match and glue it into position.

I've cut it to marry up to the old fretboard but at this stage I'm not concerned about the shape of it.

 

I use Hot stuff super glue for this. It comes in a few viscosity and I've used the thicker one so it doesn't soak into the grain too much. To speed the job up I use accelerator spray which makes the glue dry almost instantly. There's no need for clamping.

 So now there's a lump of wood sticking out of the side of the fretboard I need to shave off what I don't want.

I use my old 5/8 chisel for this. I like sharp tools a lot. I sharpen most of my chisels to a much shallower cutting angle than most woodworkers. This gives me a sharper blade but it doesn't hold its edge for long. So I have to sharpen it more often. I only ever use them for shaving - never with a mallet. If I was cutting out door hinges it would be a different matter but this is luthierie.

  I use wet stones and a strop and get my chisels sharp enough to shave my arm hairs without a rash. You can spot a luthier by the bald patches around their left fore arm :-)

 

Here's the new piece after the chiseling and I've started shaping the fret end to match the old ones.

The dented maple on the side of the neck I filled with super glue and smoothed off. You can see it but not feel it. To make it invisible would simply take too long - this guitar is going to be gigging in Oz in a couple of days.

So the Bronco lives to gig another day. I do love seeing vintage guitars still out there doing it. It seems so sad to me when they get retired because they become too precious. This is Rock n roll after all.

      Glyn

………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com

Neck Re-Set

A neck re-set is the usually the biggest thing to happen in the life of an acoustic guitar.
Over the years the string tension can cause the neck to change its angle to the top and make it impossible to get a lower action. The solution is to take the neck out, re-cut the angle and put it back in.
In a previous blog I wrote about an alternative technique for re-setting a neck so this time I'm going to show you the traditional method. Most of my re-sets are done this way.
 Guitars are put together with heat reversible glue, if they weren't then I couldn't do my job. The first step in the removal of a neck is to release the glue on the end of the fretboard - the part that overhangs the body
Acoustic guitar necks are usually glued in using a dovetail joint to give stability.

I gently warm the board until the glue is soft enough to slide an old butter knife under it.

I remove 14th and 15th frets (which are located above the dovetail joint)

I drill four 2mm holes deep into the joint through the fret slots.

 Into these holes I inject steam. I use a steam cleaner with an armoured hose attached and a long hollow needle attachment to blast the steam into the holes. This steam softens the glue and with a bit of effort the neck will come out.

This is a Gibson J45 with the neck half out, it belongs to a player from Christchurch.

This is the neck joint. You can just see one of my holes down the side of the dovetail. As soon as the neck is out I clean any glue off while its still soft.

Here's the body. The warmth from the steam usually softens the lacquer enough for it not to crack.

 This is a Martin HD35 I repaired for a player while on tour from Switzerland. Notice martin have sprayed the finish on the body before the neck is attached.

This is the HD35 neck.

This is a 1969 Gibson SJ which interestingly has a different dovetail shape from the 2005 model J45 I've shown above.

This one's a Guild - it didn't come out as cleanly as some of them.

This is a 1963 Gretsch archtop - note the packing in the side of the neck pocket.

And finally an Ovation - I had to remove the fingerboard first to get at the neck joint with this one.

As you can see I do a fair few neck re-sets and get to dismantle some lovely old instruments.

For me it has to be one of the most satisfying jobs - making old guitars live again

Glyn

………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com

Sheena

This year I've been getting busier than ever so I've taken on a full-time trainee. She's called Sheena Gillbanks. She's a guitarist, accordion player and general talented musician. She had no previous experience as a luthier but I was struck by her determination and enthusiasm. I get a couple of enquiries a week from people wanting to train as a luthier but she stood out.


Since she has started work I've been impressed with how quickly she picks things up and her 'feel' for the job.





















There's a lot to learn but I'm sure she's going to be a fantastic luthier.


..............................................................


There's been another (less productive) addition to the MrGlyn's workforce - Sammy the dog.







He's more of a hinderance than a help but he's fun to have around

This is Sammy in November - getting bigger. The little fella's getting quite a fan club around our part of Auckland.

………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com

Les Paul

.
There has been a lot said about the life of Les Paul recently. I'd just like to say - thanks Les

It seems like a good time to show some pics of one of my customer's guitars.

Its a Les Paul Custom that has been carved by hand into a stunning piece of art that also gets gigged.

And this is the man himself signing the headstock.






………………………………………………………………………………………….

I am no longer repairing guitars - since covid 19 I now work full time making pickups

www.mrglynspickups.com